introduction | model I | model II
The Model II enlarger was introduced in 1951 and included a copying attachment. For users of the Model I enlarger a copy arm with a clamp was introduced at the same time.
Ebay 2002/11/02 144GBP, 2007/01/20 217.55EUR, 2008/03/27 222.50USD (with instructions)
The copy arm can be to any vertical post any set at the correct height by using the measuring chain attached to a fitting on the side of the copying arm. A Minox size block can be placed into the jaws of the copying arm and any camera attached by the 1/4" tripod screw.
In 1956 Minox manufactured a copying table and post unit which has a wooden base made of heavy oak and four rubber feet. The copying arm and portable copying stand where discontinued in 1964.
Last Updated on 16th April 2008