introduction | model I | model II
The copying attachment for the Minox Model II and early Modell II enlargers attaches to the back of the enlarger column. Two pegs align the position and a thumb screw is tightened to lock into place. The base board of the enlarger can be used and the collar turned around so that the copying arm is immediately above the base board. Adjustment to the height are very easy and more flexible than with the copying stand. Minox stopped production in the late 1960s.
Ebay
01/11/04 127.50USD
02/01/10 101USD (no block)
02/01/10 256USD
02/04/07 102.50USD no block
02/04/15 256.51USD
02/06/28 207.60USD
02/09/22 166EUR
03/05/26 132EUR
03/11/23 178.02USD
04/03/19 102.25EUR
04/03/27 204.20USD
05/02/04 76USD
05/02/08 102.50USD
03/08/25 158.05USD and wrench
06/01/24 64EUR no block
06/02/25 200USD
06/-3/20 91USD
06/04/11 200USD (wrench, block)
06/06/12 79.79GBP (block)
06/10/08 106.50USD (block)
06/10/11 81USD
06/12/12 81GBP (block)
07/02/15 63USD (+block)
08/02/09 65EUR (with wrench)
08/02/10 76.60EUR (with block)
08/05/16 125.50USD (with block)
Last Updated on 6th June 2008